NETGEAR AirCard 782S, User Manual

Page: 53 / 76

Advanced Settings
Rev 1 Oct.13 53
To add an APN for another network:
1. On the Homepage, log in as Administrator.
2. Click Settings > Network > APN .
3. In the blank line, enter the Name of the network service provider and the APN you
obtained from them.
4. Enter the Username and Password, if these are required for the wireless network.
5. Select the network Authentication mode. The options are:
· None (default)
· PAP
· CHAP
· PAP or CHAP
6. Click beside the new APN entry.
To select the APN to use:
1. Select Active beside the APN entry to be used.
To remove an APN entry:
1. Click beside the APN entry.
Enable DMZ
In a DMZ (demilitarized zone) network configuration, a computer runs outside the
firewall in the DMZ. This computer intercepts incoming Internet traffic, providing an
extra layer of protection for the rest of the network.
To enable DMZ and designate a computer to screen incoming traffic:
1. On the Homepage, log in as Administrator.
2. Click Settings > Router > Basic .
3. Select On beside DMZ Enabled.