NETGEAR AirCard 782S, User Manual

Page: 48 / 76

AirCard 782S Mobile Hotspot User Guide
48 2400352
4. Either:
· Enter the MAC Address of the device and click , or
· If the device is currently connected, click the device in the Devices Connected
listing (on the left-side panel) and then click
Block .
5. Click Submit . (Submit button appears once you make a selection.)
To unblock a device so it can connect to your Wi-Fi network:
1. On the Homepage, log in as Administrator.
2. Click Settings > Wi-Fi > Mac Filter .
3. Click beside the device.
Allow list
To create a list of devices that are allowed to connect to your Wi-Fi network (white
list):
1. On the Homepage, log in as Administrator.
2. Click Settings > Wi-Fi > Mac Filter .
3. From the MAC Filter Mode drop-down menu, select White list .
4. Click beside the device.
5. Click Submit . (Submit button appears once you make a selection.)
Security
Enable SIM security
If desired, you can create another level of security by setting up a PIN number that must
be entered before you can view the information available to an Administrator or change
the mobile hotspot settings on the Homepage.
If you set up a PIN number, when you go to the Homepage and log in, you will be asked
to enter the PIN number before you can access the homepage as an Administrator.
To enable SIM security:
1. On the Homepage, log in as Administrator.
2. Click Settings > Network > SIM Security .