NETGEAR AirCard 782S, User Manual

Page: 37 / 76

Use Your Mobile Hotspot
Rev 1 Oct.13 37
Jump Boost (Charge) another device
You can give a boost to your tablet or smartphone if it is low or out of battery power by
connecting it to the hotspot’s Jump Boost cable and starting boost from the LCD screen
or the Homepage.
Note: You can’t charge the hotspot while it is boosting another device.
On the LCD screen:
1. Plug the Jump Boost cable into your hotspot.
2. Plug the device you want to charge into the other end of the Jump Boost cable.
3. On the home screen, tap Settings > Jump Boost .
4. Tap one of the boosting options (30 / 60 / 90 minutes).
On the Homepage:
1. Plug the Jump Boost cable into your hotspot.
2. Plug the device you want to charge into the other end of the Jump Boost cable.
3. On the homepage, log in as Administrator.
4. Click Jump Boost .
5. Click one of the boosting options (30 / 60 / 90 minutes).
Security
Change Wi-Fi network names and passwords
The Main and Guest Wi-Fi network names identify your Wi-Fi networks and are visible
to other Wi-Fi-enabled devices.
You can change these names and passwords on the LCD or the Homepage.