NetCommWireless NF10WV Setup Manual Download

Page: 1 / 4

Generic VoIP Setup Guide

NF10WV FAQs

NF10WV FAQs

1 of 4

© NetComm Wireless 2017

Configuring your NF10WV for VOIP Service

Pre-requisite

You need your VoIP account details to be able to configure VoIP Service, please contact your SIP provider or Internet Service

provider if you do not have the VoIP account details.

The following steps will take you through the process of setting up your VOIP connection.

Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type

http://192.168.20.1

into the address

bar and press

enter

At the login screen, type admin into both the User Name and the Password fields and click Log In.

Please ensure that your NF10WV is running the latest firmware version, you can find the latest firmware version for

NF10WV from the following link:

http://support.netcommwireless.com/product/NF10WV

Click

Voice

from the left-hand side menu and then click

SIP Basic Setting

Summary of Contents for NF10WV

Page 1: ...h the process of setting up your VOIP connection 1 Open a web browser such as Internet Explorer Google Chrome or Firefox type http 192 168 20 1 into the address bar and press enter 2 At the login scre...

Page 2: ...ccount then please also tick Use SIP Proxy for SIP Account 2 Use SIP Outbound Proxy for SIP Account 2 and Use SIP Registrar for SIP Account 2 and fill them with the SIP Domain name as given by your Vo...

Page 3: ...AQs 3 of 4 NetComm Wireless 2017 13 Please click SIP Advance Setting and ensure Enable RTCP Flow Control is ticked and DTMF Relay Setting is RFC2833 and SIP Transfer Protocol is UDP 14 Click the Apply...

Page 4: ...IP Status and you should see Registration Status as UP it means the VoIP is running and ready to be used 16 Check for a dial tone on your phone handset The VoIP account should now be active and you sh...