manualshive.com logo in svg

NetComm Videotron 3G36W-V, User Manual, Page: 37 / 46

Share
Download
NetComm Videotron 3G36W-V User Manual Download Page 37

 

 

 

www.netcomm.com.au 

3G36W-V User Guide 

 

37 

YML36W-VX 

System Monitor  

 

 

Figure 38 - Advanced View - System Monitor Settings 

 
The Periodic Ping Reset Monitor configures the 3G36W-V to transmit controlled ping packets to user specified IP addresses. If the 
router does not receive a response to the pings the router will reboot. The purpose of this feature is to ensure recovery of the device 
if the internet connection disconnects and does not reconnect for some reason.  
 
This feature works as follows:-  

 

Every ‚Periodic Ping Timer‛ value in seconds, the 3G36W-V sends 3 consecutive pings to the ‚Destination Address‛.  

 

If all 3 pings fail the 3G36W-V sends 3 consecutive pings to the ‚Second Address‛.  

 

The 3G36W-V then sends 3 consecutive pings to the ‚Destination Address‛ and 3 consecutive pings to the ‚Second 
Address‛ every ‚Periodic Ping Accelerated Timer‛ seconds.  

 

If all accelerated pings in step D fail, the 3G36W-V reboots after waiting the amount of time entered in the ‚Fail Count‛ 
times.  

 

If any of the pings succeed, the 3G36W-V returns to step A and does not reboot.  

 

Please note: The ‚Periodic Ping Timer‛ should never be set to a value less than 60 seconds; this is to allow the 3G36W-V 
time to reconnect to the cellular network following a reboot.  

 
To disable the Periodic Ping Reset Monitor simply set to ‚Fail Count‛ 0  
 
The 3G36W-V can be configured to automatically reboot on a periodic interval specified in minutes. While this is not necessary, it 
does ensure that in the case of remote installations it will reboot the 3G36W-V if some anomaly occurs.  
 
The default value is 0 which disables the Periodic Reset Timer.  
 
The maximum value is 65535 minutes. 

 

 

Summary of Contents for Videotron 3G36W-V















































Reviews:

No comments