manualshive.com logo in svg

NetComm Videotron 3G36W-V, User Manual, Page: 13 / 46

Share
Download
NetComm Videotron 3G36W-V User Manual Download Page 13

 

 

 

www.netcomm.com.au 

3G36W-V User Guide 

 

13 

YML36W-VX 

 

Figure 7 - Startup Wizard - Review your settings 

 

Review your settings then click ‚Finish‛ to save configuration. Click ‚Back‛ if you want to make changes.  
 
After clicking Finish, the 3G36W-V will save your configuration and reboot itself. Please wait as this process takes about 2 minutes. 
You will be guided back to the management console once the process is complete. 

Management Console Login Procedure  

After first time setup, the management console will be password protected to prevent unauthorized access to the configuration 
settings of your 3G36W-V.  
 
To log in to the management console and view the status and make changes to your 3G36W-V, please follow the steps below:  
 

1.

 

Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.20.1 or http://my.router  

2.

 

Enter the username and password configured during the first time setup and click submit. The default username admin with 
a blank password if the details haven’t been customized. Click Login to continue.  

 

Please Note: If you forget the username and password you selected during the 3G36W-V set-up process, holding the 
reset button for over 10 seconds will restart the unit with the original settings (username: admin / no password). 

 

 

                 Figure 8 - Management Console Login 

 

Summary of Contents for Videotron 3G36W-V















































Reviews:

No comments