manualshive.com logo in svg

NetComm V200, User Manual, Page: 48 / 65

Share
Download
NetComm V200 User Manual Download Page 48

48

V200 VoIP Telephone Adaptor/Router 

YML795 Rev1

7.2  Traffic Statistics

The Traffic Statistics menu will display detailed information on the V200’s LAN & WAN

Interface, TCP-IP settings and DHCP client leased information.

7.2.1  Interface Statistics

Interfaces is the first page of the Traffic Statistics window.

Interface Name 

Name of the interface

Admin Status 

 

Indicates whether the interface is Up or Down.

Octets In 

 

Number of Octets (bytes) received.

Unicast PktsIn

 

Number of unicast packets received.

Broadcast PktsIn

 

Number of broadcast packets received.

Discards In

 

Number of packets received that were discarded.

Errors In

 

Number of inward errors.

Octets Out

 

Number of Octets (bytes) transmitted.

Unicast PktsOut

 

Number of unicast packets transmitted.

Broadcast PktsOut

 

Number of broadcast packets transmitted.

Discards Out

  

 Number of packets transmitted that were discarded.

Errors Out

 

Number of outward errors.

Summary of Contents for V200


































































Reviews:

No comments