8
NTC-8000 – M2M Multi-Port Network Gateway
UM-00006 v1.1
www.netcommwireless.com
Interfaces
The following interfaces are available on the NTC-8000-01:
Figure 2 - NTC-8000-01 Rear panel interfaces
ITEM
INTERFACE
FUNCTION
1
3G Antenna Connectors (SMA)
Connection point for the mobile broadband main and auxiliary antennas
2
WiFi Antenna Connectors (Reverse polarity SMA)
Connection point for the reverse polarity SMA female WiFi antennas
3
Ethernet Ports
8 x 10/100 Base-TX Ethernet RJ-45 ports.
4
Reset
Press the reset button once to reboot the gateway.
Press and hold the reset button for between 3 and 10 seconds, then release to boot
the gateway in recovery mode.
Press and hold the reset button for more than 10 seconds to return the gateway to
factory default settings.
5
Power
9-36V DC, 4-way mini fit power connection with ignition switch detection. See diagram
below for correct wiring of the 4-way mini fit connector.
Table 5 - Integrated Interfaces
1
1
2
2
3
4
5
