NTC-6000 Series V.250 Manual
Page 18 of 32
To suit software version 1.1.0
7/21/2010
ATD<n>
Establishes a
Packet Data Session
based on profile <n> as set using the ^PRFL
command or browser based configuration „profile number‟ on the „Data
Connection‟ page.
If the selected profile is configured for PAD client mode a PAD session is
established to the host defined in the profile.
ATD<phone number>
Originates a
Circuit Switched Data
call to <phone number>
ATD<host>[:<port>[:<protocol>]
Originates a PAD session to the <host> and <port> <protocol> provided.
The <host> parameter may be an IP address or hostname.
The <port> parameter is optional if not supplied the port number from the currently
selected profile is used.
The <protocol> is optional and may be one of “TCP” or “UDP”, if not supplied the
protocol from the currently selected profile is used.