NetComm NTC-6000 SERIES, Command Manual, Page: 16 / 32

NTC-6000 Series V.250 Manual Page 16 of 32
To suit software version 1.1.0 7/21/2010
+IFC Local RS-232 flow control
This parameter is used to control the operation of local flow control between the terminal
and the local DTE.
.
Default: 0,0 Storage: &W
Command values:
AT+IFC= <DCE_by_DTE>,<DTE_by_DCE>†
Where:
<DCE_by_DTE> Specifies the method to be used by the DTE to control
the flow of received data from the DCE.
<DTE_by_DCE> Specifies the method to be used by the DCE to control
the flow of transmitted data from the DTE.
The valid numeric variables for the
+IFC command are as follows:
0 No Flow Control
2 Hardware
By default, the modem is set up as
AT+IFC=2,2 to allow hardware flow
control in both directions.