NetComm NTC-6000 SERIES, Command Manual, Page: 15 / 32

NTC-6000 Series V.250 Manual Page 15 of 32
To suit software version 1.1.0 7/21/2010
+IPR Local RS-232 interface baud rate
This parameter determines the baud rate at which data will be sent and received on
the local RS-232 interface.
Default: 115200 Storage: &W
Command values:
+IPR= <rate>
Where <rate> is a one of the following: -
300, 1200,2400,4800,9600,19200,38400,57600,115200
+ICF Local RS-232 interface character framing
This parameter determines the character framing which used at the local RS-232
interface.
Default: 3,1 Storage: &W
Command values:
+ICF= <format>,[<parity>]
Where <format> is a single digit and determines the number of bits in the data bits,
the presence of a parity bit, and the number of stop bits in the start-stop frame
according to the following table: -
<format> Meaning
1 8 Data 2 Stop
2 8 Data 1 Parity 1 Stop
3 8 Data 1 Stop
4 7 Data 2 Stop
5 7 Data 1 Parity 1 Stop
6 7 Data 1 Stop
And where <parity> is a single digit and determines how the parity bit is generated
and checked, if present according to the following table: -
<parity> Meaning
0 Odd
1 Even
<parity> is ignored where format is one of 1,3,4 or 6.