NTC-6000 Series V.250 Manual
Page 10 of 32
To suit software version 1.1.0
7/21/2010
Q
Quiet mode
Whilst in command mode, controls whether the terminal will send result codes and
unsolicited responses to the host.
NB this does not suppress the terminal from sending solicited responses.
Default:
1
Storage:
&W Command
Command values:
Q0
Send result codes and unsolicited responses.
Q1
Do not end result codes and unsolicited responses.
V
Result code form
Selects whether the terminal sends long form (verbose) or short-form (numeric)
responses to the host.
Default:
1
Storage:
&W Command
Command values:
V0
Send short form (numeric) codes.
V1
Send long form (verbose) result codes.
I
Identification
Reports information to the host that may be used to help identify the product.
Default:
0
Command values:
I0
Report product identity.
I1
Report software version.
^CROK
Send OK response to <CR>
Enables or disables sending of an OK response when the unit receives the <CR>
character by itself.
Default:
0
Storage:
&W Command
Command values:
^CROK=0
Do not send OK in response to <CR>
^CROK=1
Send OK in response to <CR>