14
NTC-5000 Series Quick Start Guide
YML-NTC5000 280610
Step Six: Connect to the Cellular Network
This section describes how to set up the Cellular Router to initiate a wireless
WAN connection via PPP. There are 2 different ways:
Initiating the PPP Connection directly from the Cellular Router acting
as the PPP Client (most common).
Initiating the PPP Connection from a different PPP client
(i.e. laptop or router) with the Cellular Router running in PPPoE
mode. This method is not documented in this quick start guide.
Initiating a PPP Connection from the Cellular Router
Click the
Internet Settings > WWAN (3G)
link on top panel of the status
page to open the
Connection
page.