NetComm Wireless 4G M2M Router
73
ITEM
DESCRIPTION
Primary server IP address
The IP address of the TCP server to which the router should attempt the initial connection.
Port number
The port number that the TCP server operates on.
Backup server IP address
If connection to the primary server fails, the router will attempt to connect to this address.
Port number
The port number that the backup TCP server operates on.
Inactivity timeout
The period, in seconds, that the socket is considered idle/inactive if no packets are sent. The timer begins at the
end of the last sent packet. The valid range is 0-10000 seconds. If this field is set to 0, the client disconnects
immediately after sending a packet.
Minimum transmit buffer size
The number of bytes that must be reached before the client decides to transmit.
Start ID
This is a string which, if configured, is sent before any serial data is sent, every time the client connects <START
ID><SERIAL DATA>
End ID
This is a string which, if configured, is sent after all serial data, just before the client disconnects <START
ID><SERIAL DATA><END ID>
Keepalive
Keepalive sends a message to check that the link is still active or to keep it active.
Keepalive count
The number of keepalive messages to send.
Keepalive idle
The duration between two keepalive transmissions when in idle condition.
Keepalive interval
The duration between two successive keepalive retransmissions.
Table 21 – TCP connect-on-demand endpoint options
To create an endpoint:
1.
Click the +Add button on the right side of the page. A pop-up window appears.
Figure 87 - Creating an endpoint
2.
In the Endpoint name field, type a name for this endpoint. The name can contain alphanumeric characters only i.e. A-Z, a-
z, 0-9.
3.
Use the Endpoint types drop down list to select the type of endpoint to configure.
4.
Click the OK button. The router displays a screen with configuration options for your chosen endpoint type. Enter the
options for your endpoint as required.
5.
Click the Save button. The Endpoints list is displayed with the newly created endpoint listed and a summary of the settings
your configured.
Figure 88 - Endpoints list