31.
Enter a
Traffic Class Name
reflecting the High Priority QoS rule; eg.
PC1HighPriority.
32.
Leave the
Rule Order
as
Last
.
33.
Set the
Rule Status
to
Enable
.
34.
Set the Class Interface according to how the device connects to the router. In the example above
LAN
is
selected. Other options are
Wireless
,
Local
and
USB
.
35.
Set the
Ether Type
to
IP(0x800)
. Other options include ARP(0x8086), Ipv6(0x86DD),
PPPoE_DISC(0x8863), 8865(0x8865), 8866(0x8866), 8021Q(0x8100).
36.
Enter the
Source MAC Address
of the device, the unique 12 character signature with every 2 characters
separated by a colon(:), that you previously entered to reserve the device's IP address.
37.
Enter the
Source IP Address
of the device that you previously entered into the Static IP Lease List, in the
range of 192.168.1.x In the example above the IP address is 192.168.1.5.
38.
Enter a
Destination MAC Address
if the connection is to a single device. This is useful for VPN connections.
If you wish the destination MAC address to be any address leave the field blank.
39.
Enter a
Destination IP Address
if the connection is to a single device. This is useful for VPN connections. If
you wish the destination IP address to be any address leave the field blank.
40.
Enter a
Destination Subnet Mask
if you have entered a Destination MAC address and Destination IP
address. This would normally be 255.255.255.0 unless your system administrator advises otherwise. If you
have not entered a Destination MAC or IP address leave the field blank.
41.
Set the
Differentiated Service Code Point (DSCP) Check
to
EF(101110)
.
42.
Set the
Protocol
to
TCP
. Other options include UDP, ICMP or IGMP.
43.
Set “
Assign Classification Queue
” to Priority 1 (in the example above pppoa0&atm0&Path0&Key38&Pre1).
Other options or priority 2 and 3. Priority 1 gives the highest priority with priority 3 being the lowest.
44.
Set
Mark Differentiated Service Code Point (DSCP)
as
EF(101110).
45.
Set
Mark 802.1p Priority
as
5
. In the scale 0-7, 0 is best effort, 6 and 7 are reserved for networking
performance so set 5 as the highest priority.
46.
Click the
Apply/Save
button.