56.
Enter a
Destination MAC Address
if the connection is to a single device. This is useful for VPN connections.
If you wish the destination MAC address to be any address leave the field blank.
57.
Enter a
Destination IP Address
if the connection is to a single device. This is useful for VPN connections. If
you wish the destination IP address to be any address leave the field blank.
58.
Enter a
Destination Subnet Mask
if you have entered a Destination MAC address and Destination IP
address. This would normally be 255.255.255.0 unless your system administrator advises otherwise. If you
have not entered a Destination MAC or IP address leave the field blank.
59.
Set the
Differentiated Service Code Point (DSCP) Check
to
AF11(001010)
.
60.
Set the
Protocol
to
TCP
. Other options include UDP, ICMP or IGMP.
61.
Set “
Assign Classification Queue
” to Priority 3 (in the example above pppoa0&atm0&Path0&Key39&Pre3).
Other options are priority 1 and 2. Priority 1 gives the highest priority with priority 3 being the lowest.
62.
Set
Mark Differentiated Service Code Point (DSCP)
as
AF11(001010).
63.
Set
Mark 802.1p Priority
as
0
. In the scale 0-7, 0 is best effort, 6 and 7 are reserved for networking
performance so set 0 as the lowest priority.
64.
Click the
Apply/Save
button.
65.
You now have 2 Quality of Service rules implemented for 2 devices connecting to the NB604 router.
66.
Select
Management
>
Reboot
. Click the
Reboot
button to restart the router and save the new settings.
67.
To test your Quality of Service settings try running speed-tests (
http://speedtest.net
) on both
pcs/devices
simultaneously
.