manualshive.com logo in svg

NetComm IFWA-661, Installation Manual, Page: 47 / 63

Share
Download
NetComm IFWA-661 Installation Manual Download Page 47

 

 

IFWA-661 Outdoor Wireless Antenna 

–

 Installation Guide 

47 of 63 

v1.0   September 20, 2019 

© NetComm Wireless 2019

 

 

Move to New Location 

Installer will be given the option to generate a QR Code. 

Status fields are provided for: 

 

CBRS Registration Status (Not Registered, Registering, Registered) 

 

Serving cell 

If the device had previously been *mounted, then the *mounted flag will be cleared. 

If the device was Registered upon entering the screen, it will attempt to Deregister. 

If Deregistration is successful, then the screen will be updated to show “It is now safe to r

emove the Smart Antenna 

Tool and move the OW

A”.

 

If Deregistration is not successful after 45 seconds, then the device will stay “registered” and prompt for 

deregistration at the next power-cycle. 

Press and hold on the QR code below to save the image to your device. The filename of the saved file will contain 
the BAN and date. 

The screen will be updated to show “It is now safe to remove the 

Smart Antenna Tool and move the OW

A”.

 

 

 

Summary of Contents for IFWA-661
































































Reviews:

No comments