IFWA-661 Outdoor Wireless Antenna
–
Installation Guide
45 of 63
v1.0 September 20, 2019
© NetComm Wireless 2019
If there is an updated version of OA firmware and/or OA screens, there will be an Update OWA Firmware button;
otherwise, the button will be grayed out. Not yet available and subject to change.
Note that in some cases, new screens may require new APIs which would force an OA firmware update prior to a
screen update being made available.
If the installer selects the Update Firmware button, then flow is transferred to the OA Update Screen.
Available Cell List (All cells will be shown)
Cell ECGI (with asterisk indicating the serving cell)
Minimum Allowable RSRP
Measured RSRP
Measured RSSINR
Measured RSRQ
Indicator if the Cell is Acceptable
This screen generates a tone, related to the strongest signal. The installer can use the device speaker or
headphones to hear the tone.
Azimuth and Downtilt of the current orientation are shown.
The Save to compare column provides buttons to save a Cell to compare signal with. When locked, the screen will
show the:
Locked Azimuth
Locked Downtilt
Locked RSRP
Locked RSSINR
Locked RSRQ
Quick Copy
The Quick Copy field will be a method to reduce the number of times the installer needs to move between WFE
screens and Installation screens (on the Smart Antenna Tool) and might even allow information to be cached in a
paste buffer prior to installation, if mobile coverage is not available at the installation site. Items that are to be
covered in the Quick Copy field are:
Install Parameters
BAN
Cell Sector IDs (various)
Band Select (B30/B48)
Installer ID (Optional)
Installer Name (Optional)
Registration Parameters
Call Sign
User ID
Interference Grouping
Installer’s CPI Certificate