NetComm Dynalink 3G8WV, Setup Manual, Page: 3 / 34

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your
ethernet connection:
1.
Click on the Start Menu , and go to “ Control Panel ”.
2.
Click on “ Network and Sharing Centre ”.
(If you only see " Network and Internet ", open that first, and then click on " Network and
Sharing Centre ".)
3.
Click on “ Change adapter settings ” (
on the lefthandside of the window
).
4.
Right click on “ Local Area Connection ” and select “ Properties ”.
5.
Double-click on “ Internet Protocol Version 4 (TCP/IPv4) ”.
6.
Select "Obtain an IP address automatically" , and " Obtain DNS server
address automatically ".
7.
Click “ OK ”, and then click “ OK ” again.
Below are the instructions for setting Mac OS X to obtain an IP address automatically for your
ethernet connection:
1.
Click on the Apple Menu, and go to " System Preferences ".
2.
Click on " Network ".
3.
Click on “ Ethernet ” or " Built-in Ethernet ".
4.
Click on the " Configure " drop-down box, and select " Using DHCP " then click
" Apply ".