6
NTC-6000 Series Quick Start Guide
NetComm Commercial
Overview of Cellular Router Interfaces
Field
Description
Main Antenna Socket
SMA Female
Receive Diversity Antenna
Socket
SMA Female
Serial RS-232 Port
For connecting to a terminal using a DE-9 cable.
5 Indicator LEDs
Indicate visually the activities and connection state for power,
service type, data traffic, data carrier connection and network
signal strength.
2-Way Captive Power
Terminal Block
Power terminal block and the wide voltage range of 8-28V DC
simplify the installation in different industrial environments
Reset Button
Resetting the router to factory default values
Ethernet Port
For direct connection to your device or number of devices
through a hub or network router.
SIM Card Reader
For insertion and removal of SIM Card
Configuring your Router
You will need the following hardware components to set up the Cellular
Router:
Power Supply (8-28VDC)
Ethernet cable
Laptop or PC
Active SIM card
The router is primarily managed via web interface. It may also be configured
via the units serial (V.24) port using “AT” (V.250) commands, this method of
operation is further detailed in the user guide.
Before you power up the Cellular Router, please insert an active SIM card.