manualshive.com logo in svg

NetComm CallDirect NTC-6900, Quick Start Manual, Page: 18 / 18

Share
Download
NetComm CallDirect NTC-6900 Quick Start Manual Download Page 18

18  

NTC-6000 Series Quick Start Guide

Product Warranty

NetComm products have a standard 12 months warranty from date of 

purchase. However some products have an extended 

warranty option, 

via registering your product online at the NetComm website 

www.

netcommlimited.com

.

Technical Support

If you have any technical difficulties with your product, please refer to the 

support section of our website.

www.netcomm.com.au/support

Note:     NetComm Technical Support for this product only covers the basic installation and features 

outlined in the Quick Start Guide. For further information regarding the advanced features of 

this product, please refer to the configuring sections in the User Guide or contact a Network 

Specialist.

NetComm Commercial

NETCOMM LIMITED

  Head Office  

PO Box 1200, Lane Cove NSW 2066 Australia

P:

 02 9424 2070  

F:

 02 9424 2010 

E:

 [email protected]  

W:

 www.netcommlimited.com.

Summary of Contents for CallDirect NTC-6900



















Reviews:

No comments