Netberg Demos R130 M2, Manual

Page: 33 / 263

Installing hardware
20
2.1. Safety measures
Always ask for assistance to move or lift the system.
Only perform troubleshooting as authorized by the product documentation, or as di-
rected by a service and support team. Repairs not authorized by warranty may void
the warranty and damage the system.
Always make sure to disconnect the system from the electrical source. Powering down
the system DOES NOT insure the system is safe for repairs.
Server components and circuit boards are easily damaged by discharges of static
electricity. Working on servers that are connected to a power supply can be extremely
dangerous.
Always disconnect the server from the power outlet whenever you are working inside
the server case.
Wear a grounded wrist strap. If none are available, discharge any personal static elec-
tricity by touching the bare metal chassis of the server case, or the bare metal body of
any other grounded device.
Humid environments tend to have less static electricity than dry environments. A
grounding strap is warranted whenever danger of static electricity exists.
Do not touch the components on the boards unless it is necessary to do so. Do not
flex or stress circuit boards.
Leave all replacement components inside their static-proof packaging until you are
ready to use them.