Replacing other hardware components
You might need to replace a drive, fan, power supply, or battery in the StorageGRID appliance.
Before you begin
You have the E-Series hardware replacement procedure.
About this task
To replace a drive, power-fan canister, fan canister, power canister, battery, or drive drawer, refer to
the standard procedures for the E2700 and E5600 storage arrays. Focus on the step-by-step
instructions for removing and replacing the hardware itself; many of the SANtricity Storage Manager
procedures do not apply to an appliance.
Model
FRU
See
SG5612
Drive
Replacing a Drive in E2600, E2700,
E5400, E5500, E5600 or 12-Drive or 24-
Drive Trays
Power-fan canister
Replacing a Failed Power-Fan Canister
in the E5612 or the E5624 Controller-
Drive Tray
Battery in the E2700
controller (requires
removing the controller)
Follow the steps in
on page 59, but install the new
battery in the existing controller.
SG5660
Drive
Replacing a Drive in E2660, E2760,
E5460, E5560, or E5660 Trays
Power canister
Replacing a Failed Power Canister in the
E5660 Controller-Drive Tray
Fan canister
Replacing a Failed Fan Canister in the
E5660 Controller-Drive Tray
Battery in the E2700
controller (requires
removing the controller)
Follow the steps in
on page 59, but install the new
battery in the existing controller.
Related information
NetApp E-Series and EF-Series Hardware Replacement Procedures
NetApp Documentation: E2700 Series
NetApp Documentation: E5600 Series
Changing the link configuration of the E5600SG controller
You can change the Ethernet link configuration of the E5600SG controller. You can change the port
bond mode, the network bond mode, and the link speed.
Before you begin
•
You must have specific access permissions. For details, see the instructions for administering
StorageGRID.
64 | Hardware Installation and Maintenance Guide for SG5600 Appliances
Summary of Contents for StorageGRID SG5600 Series
Page 2: ......
