NetApp HCI Manual Download Page 65

Page: 65 / 363

H615C compute node

Here is the cabling for the H615C node:



H615C nodes are deployed only in the two-cable configuration. Ensure that all the VLANs
are present on ports A and B.

For ports A and B, connect the node to a 10/25GbE network using two SFP28/SFP+ cables.

(Optional, recommended) Connect the node to a 1GbE network using an RJ45 connector in the IPMI

port.

Connect both power cables to the node, and plug the power cables to a 110-140V power outlet.

H610S storage node

Here is the cabling for the H610S node:

Connect the node to a 1GbE network using two RJ45 connector in the IPMI port.

Connect the node to a 10/25GbE network using

two SFP28 or SFP+ cables.

Connect the node to a 1GbE network using

an RJ45 connector in the IPMI port.

Connect both power cables to the node.

Summary of Contents for HCI












































































































































































































































































































































































Search results

Summary of Contents for HCI

Reviews:

Brands by name

Popular brands

NetApp HCI, Manual

Search results

Summary of Contents for HCI

Reviews:

Brands by name

Popular brands