manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 273

This requires a fourth IP address and separate entry in your DNS configuration.

◦

L4 load balancing

: This is a technique where a virtual machine or container hosting an application like

nginx is configured to distribute requests among the three nodes of the management cluster.

◦

Round-robin DNS

: This is a technique where a single host name is configured in the DNS system that

rotates requests among the three hosts that form the management cluster.

Rancher FQDN

The installation requires assignment of a Rancher URL, which includes the fully qualified domain name
(FQDN) of the host where the Rancher UI will be served after the installation is complete.

In all cases the Rancher UI is accessible in your browser over https protocol (port 443).

Production deployments require an FQDN configured that load balances across the management cluster
nodes. Without using FQDN and load balancing, the environment is not resilient and is suitable only for demo
environments.

Required ports

Ensure that the list of ports in the "Ports for Rancher Server Nodes on RKE" section of the 

Rancher Nodes

section of the official 

Rancher documentation

 are open in your firewall configuration to and from the nodes

running Rancher server.

Required URLs

The following URLs should be accessible from the hosts where the Rancher control plane resides:

URL

Description

https://charts.jetstack.io/

Kubernetes integration

https://releases.rancher.com/server-charts/stable

Rancher software downloads

https://entropy.ubuntu.com/

Ubuntu entropy service for random number generation

https://raw.githubusercontent.com/vmware/cloud-init-
vmware-guestinfo/v1.3.1/install.sh

VMware guest additions

https://download.docker.com/linux/ubuntu/gpg

Docker Ubuntu GPG public key

https://download.docker.com/linux/ubuntu

Docker download link

https://hub.docker.com/

Docker Hub for NetApp Hybrid Cloud Control

Deploy Rancher on NetApp HCI

To use Rancher on your NetApp HCI environment, you first deploy Rancher on NetApp
HCI.

Before starting the deployment, be sure to check the datastore free space and other

requirements for Rancher on NetApp HCI

.

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands