Update management services using Hybrid Cloud Control
You can update your NetApp management services using NetApp Hybrid Cloud Control (HCC).
Management service bundles provide enhanced functionality and fixes to your installation outside of major
releases.
Before you begin
• You are running management node 11.3 or later.
• If you are updating management services to version 2.16 or later and you are running a management node
11.3 to 11.8, you will need to increase your management node VM’s RAM prior to updating management
services:
a. Power off the management node VM.
b. Change the RAM of the management node VM from 12GB to 24GB RAM.
c. Power on the management node VM.
• Your cluster version is running NetApp Element software 11.3 or later.
• You have upgraded your management services to at least version 2.1.326. NetApp Hybrid Cloud Control
upgrades are not available in earlier service bundles.
For a list of available services for each service bundle version, see the
.
Steps
1. Open a web browser and browse to the IP address of the management node: <code><a
href="https://<ManagementNodeIP>" class="bare">https://<ManagementNodeIP></a>;</code>
2. Log in to NetApp Hybrid Cloud Control by providing the storage cluster administrator credentials.
3. Click
Upgrade
near the top right of the interface.
4. On the Upgrades page, select the
Management Services
tab.
The Management Services tab shows the current and available versions of management services
software.
If your installation cannot access the internet, only the current software version is shown.
5. If your installation can access the internet and if a management services upgrade is available, click
Begin
Upgrade
.
6. If your installation cannot access the internet, do the following:
a. Follow the instructions on the page to download and save a management services upgrade package to
your computer.
b. Click
Browse
to locate the package you saved and upload it.
After the upgrade begins, you can see the upgrade status on this page. During the upgrade, you might lose
connection with NetApp Hybrid Cloud Control and have to log back in to see the results of the upgrade.
Update management services using the management node API
Users should ideally perform management services updates from NetApp Hybrid Cloud Control. You can
however manually update management services using the REST API UI from the management node.
Summary of Contents for HCI
Page 95: ...NetApp HCI Resources page...
Page 308: ......
