NetApp CN1610 Cli Command Reference Download Page 463

Page: 463 / 708

460

Port-Channel/LAG (802.3ad) Commands

no port-channel
system priority

Use this command to configure the default port-channel system priority value.

show lacp actor

Use this command to display LACP actor attributes. Instead of slot/port

lag

lag-intf-num

can be used as an alternate way to specify the LAG interface.

lag

lag-intf-num

can also be used to specify the LAG interface where

lag-intf-

num

is the LAG port number.

The following output parameters are displayed.

show lacp partner

Use this command to display LACP partner attributes.

The following output parameters are displayed.

Format

no port-channel system priority

Mode

Global Config

Format

show lacp actor {slot/port|all}

Mode

Global Config

Parameter

Description

System Priority

The administrative value of the Key.

Actor Admin Key

The administrative value of the Key.

Port Priority

The priority value assigned to the Aggregation Port.

Admin State

The administrative values of the actor state as
transmitted by the Actor in LACPDUs.

Format

show lacp actor {slot/port|all}

Mode

Privileged EXEC

Parameter

Description

System Priority

The administrative value of priority associated with
the Partner’s System ID.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands

NetApp CN1610, Cli Command Reference

Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands