NetApp CN1610, Cli Command Reference

Page: 415 / 708

412 Port-Based Network Access Control Commands
authentication
priority
This command sets the priority for the authentication methods used on a port.
The available authentication methods are Dot1x, MAB, and captive portal. The
authentication priority decides if a previously authenticated client is
reauthenticated with a higher-priority method when the same is received. Captive
portal is always the last method in the list.
no authentication
priority This command returns the port to the default order of priority for the
authentication methods.
authentication
restart This command sets the time, in seconds, after which reauthentication starts. (The
default time is 300 seconds.) The timer restarts the authentication only after all
the authentication methods fail. At the expiration of this timer, authentication is
reinitiated for the port.
no authentication
restart This command sets the reauthentication value to the default value of 3600
seconds.
Default
authentication order dot1x mab captive portal
Format
authentication priority {dot1x [mab [captive portal] |
captive portal] | mab [dot1x [captive portal]| captive
portal] | captive portal}
Mode Interface Config
Format
no authentication priority
Mode Interface Config
Format
authentication restart <300-65535>
Mode Interface Config
Format
no authentication restart
Mode Interface Config