manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 361

358

VLAN Commands

 

no vlan protocol 
group name

This command removes the name from the group identified by 

groupid

.

vlan protocol group 
add protocol 

This command adds the 

protocol

 to the protocol-based VLAN identified by 

groupid

. A group may have more than one protocol associated with it. Each 

interface and protocol combination can only be associated with one group. If 
adding a protocol to a group causes any conflicts with interfaces currently 
associated with the group, this command fails and the protocol is not added to the 
group. The possible values for 

protocol

 are

 

The possible values for

 protocol-

list

 includes the keywords 

ip, arp, 

and

 ipx

 and hexadecimal or decimal 

values ranging from 0x0600 (1536) to 0xFFFF (65535). The protocol list can 
accept up to 16 protocols separated by a comma.

no vlan protocol 
group add protocol 

This command removes the protocols specified in the 

protocol-list 

from 

this protocol-based VLAN group that is identified by this 

groupid

.

protocol group

This command attaches a 

vlanid

 to the protocol-based VLAN identified by 

groupid

.    A group may only be associated with one VLAN at a time, however 

the VLAN association can be changed.

Format

no vlan protocol group name 

groupid

Mode

Global Config

Default

none

Format

vlan protocol group add protocol 

groupid ethertype 

protocol-list

Mode

Global Config

Format

no vlan protocol group add protocol 

groupid ethertype 

protocol-list

Mode

Global Config

Default

none

Format

protocol group 

groupid vlanid

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands