manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 358

Chapter 5: Switching Commands

355

 

vlan port 
acceptframe all

This command sets the frame acceptance mode for all interfaces. 

The modes are defined as follows:

With either option, VLAN tagged frames are forwarded in accordance with the 
IEEE 802.1Q VLAN Specification.

no vlan port 
acceptframe all

This command sets the frame acceptance mode for all interfaces to Admit All. 
For Admit All mode, untagged frames or priority frames received on this 
interface are accepted and assigned the value of the interface VLAN ID for this 
port. With either option, VLAN tagged frames are forwarded in accordance with 
the IEEE 802.1Q VLAN Specification.

auto

The interface is dynamically registered in this 
VLAN by GVRP. The interface will not participate 
in this VLAN unless a join request is received on 
this interface. This is equivalent to registration 
normal.

Participation 
Options

Definition

Default

all

Format

vlan port acceptframe all {vlanonly | admituntaggedonly 

|all} 

Mode

Global Config

Mode

Definition

VLAN Only mode

Untagged frames or priority frames received on this 
interface are discarded. 

Admit Untagged Only 
mode

VLAN-tagged and priority tagged frames received 
on this interface are discarded.

Admit All mode

Untagged frames or priority frames received on this 
interface are accepted and assigned the value of the 
interface VLAN ID for this port. 

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands