NetApp CN1610 Cli Command Reference Download Page 33

Page: 33 / 708

Network Interface Commands

Network Interface Commands

This section describes the commands you use to configure a logical interface for
management access. To configure the management VLAN, see “

network

mgmt_vlan

” on page 351.

enable (Privileged
EXEC access)

This command gives you access to the Privileged EXEC mode. From the
Privileged EXEC mode, you can configure the network interface.

do (Privileged EXEC
commands)

This command executes Privileged EXEC mode commands from any of the
configuration modes.

The following is an example of the

command that executes the Privileged

EXEC command

script list

in Global Config Mode.

(CN1610) #configure

(CN1610)(config)#do script list

Configuration Script Name Size(Bytes)

-------------------------------- -----------

backup-config 2105

running-config 4483

startup-config 445

3 configuration script(s) found.

2041 Kbytes free.

Format

enable

Mode

User EXEC

Format

Priv Exec Mode Command

Mode

◆

Global Config

◆

Interface Config

◆

VLAN Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands

NetApp CN1610, Cli Command Reference

Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands