manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 210

Chapter 4: Utility Commands

207

 

clear logging email 
statistics

This command resets the email alerting statistics.

mail-server

This command configures the SMTP server to which the switch sends email alert 
messages and changes the mode to Mail Server Configuration mode. The server 
address can be in the IPv4, IPv6, or DNS name format.

no mail-server

This command removes the specified SMTP server from the configuration.

Term

Definition

Email Alert Operation 
Status

The operational status of the email alerting feature.

No of Email Failures

The number of email messages that have attempted 
to be sent but were unsuccessful.

No of Email Sent

The number of email messages that were sent from 
the switch since the counter was cleared.

Time Since Last 
Email Sent

The amount of time that has passed since the last 
email was sent from the switch.

Format

clear logging email statistics

Mode

Privileged EXEC

Format

mail-server {

ip-address

 | 

ipv6-address

 | 

hostname

}

Mode

Global Config

Format

no mail-server {

ip-address

 | 

ipv6-address 

| 

hostname

}

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands