NetApp CN1610, Cli Command Reference

Page: 171 / 708

168 System Information and Statistics Commands
show fiber-ports
optical-transceiver-
info
This command displays the SFP vendor related information like Vendor Name,
Serial Number of the SFP, Part Number of the SFP. The values are derived from
the SFP's A0 table using the I
2
C interface.
Format
show fiber-ports optical-transceiver-info {all |
slot/port }
Mode Privileged EXEC
Field Description
Vendor Name The vendor name is a 16 character field that contains
ASCII characters, left-aligned and padded on the
right with ASCII spaces (20h). The vendor name
shall be the full name of the corporation, a
commonly accepted abbreviation of the name of the
corporation, the SCSI company code for the
corporation, or the stock exchange code for the
corporation.
Length (50um, OM2) This value specifies link length that is supported by
the transceiver while operating in compliance with
applicable standards using 50 micron multimode
OM2 [500MHz*km at 850nm] fiber. A value of zero
means that the transceiver does not support 50
micron multimode fiber or that the length
information must be determined from the transceiver
technology.
Length (62.5um,
OM1) This value specifies link length that is supported by
the transceiver while operating in compliance with
applicable standards using 62.5 micron multimode
OM1 [200 MHz*km at 850nm, 500 MHz*km at
1310nm] fiber. A value of zero means that the
transceiver does not support 62.5 micron multimode
fiber or that the length information must determined
from the transceiver technology