manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 151

148

System Information and Statistics Commands

 

show interface 

This command displays a summary of statistics for a specific interface or a count 
of all CPU traffic based upon the argument.

The display parameters, when the argument is slot/port, are as follows:

Format

show interface {slot/port | switchport}

Mode

Privileged EXEC

Parameters

Definition

Packets Received 
Without Error

The total number of packets (including broadcast 
packets and multicast packets) received by the 
processor.

Packets Received 
With Error

The number of inbound packets that contained errors 
preventing them from being deliverable to a higher-
layer protocol.

Broadcast Packets 
Received

The total number of packets received that were 
directed to the broadcast address. Note that this does 
not include multicast packets.

Receive Packets 
Discarded

The number of inbound packets which were chosen 
to be discarded even though no errors had been 
detected to prevent their being deliverable to a 
higher-layer protocol. One possible reason for 
discarding such a packet could be to free up buffered 
space.

Packets Transmitted 
Without Error

The total number of packets transmitted out of the 
interface. 

Transmit Packets 
Discarded

The number of outbound packets which were chosen 
to be discarded even though no errors had been 
detected to prevent their being deliverable to a 
higher-layer protocol. A possible reason for 
discarding a packet could be to free up buffer space. 

Transmit Packets 
Errors

The number of outbound packets that could not be 
transmitted because of errors.

Collisions Frames

The best estimate of the total number of collisions 
on this Ethernet segment.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands