NetApp AltaVault AVA400, Administration Manual

Page: 73 / 276

NetApp AltaVault Cloud Integrated Storage Administration Guide 73
Beta Draft
Configuring SNMP basic settings Configuring system administrator settings
3. Click Apply to apply your changes to the running configuration.
To set secure views
1. Choose Configure > SNMP ACLs.
2. Under Views, complete the configuration as described in this table.
.
3. Click Apply to apply your changes to the running configuration.
To add an access policy
1. Choose Configure > SNMP ACLs.
2. Under Access Policies, complete the configuration as described in this table.
.
3. Click Apply to apply your changes to the running configuration.
Control Description
Add a New View Displays the controls to add a new view.
View Name Specify a descriptive view name to facilitate administration.
Includes Specify the object identifiers (OIDs) to include in the view, separated by commas. For example,
.1.3.6.1.4.1. By default, the view excludes all OIDs.
You can specify .iso or any subtree or subtree branch.
You can specify an OID number or use its string form. For example,
.iso.org.dod.internet.private.enterprises.xxx.products.AltaVault.system.model
Excludes Specify the OIDs to exclude in the view, separated by commas. By default, the view excludes all
OIDs.
Add Adds the view.
Remove Selected Select the check box next to the name and click Remove Selected .
Control Description
Add a New Access Policy Displays the controls to add a new access policy.
Group Name Select a group name from the drop-down list.
Security Level Determines whether a single atomic message exchange is authenticated. Select one of the
following from the drop-down list:
• No Auth - Does not authenticate packets and does not use privacy. This is the default setting.
• Auth - Authenticates packets but does not use privacy.
• AuthPriv - Authenticates packets using AES or DES to encrypt messages for privacy.
A security level applies to a group, not to an individual user.
Read View Select a view from the drop-down list.
Add Adds the policy to the policy list.
Remove Selected Select the check box next to the name and click Remove Selected .