manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 64

64

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Configuring system administrator settings

Configuring alarm settings

SMB

Enables an alarm when AltaVault detects the Domain Controller is not reachable.

• Domain Controller Network Status - Indicates the Domain Controller is unreachable. The alarm 

is cleared when network connectivity to the Domain Controller is restored. If the alarm is not 

cleared after the network connectivity is restored, you can clear the alarm manually using 

alarm smb_alarms clear 

command.

Software update available

Enables an alarm when a new version of the software is available.

Shelf Error

Shelf Missing - This alarm is applicable only to the AltaVault models. The AltaVault Expansion 
Shelf is missing or cannot be accessed.

Shelf <shelf name>

• Shelf Inconsistent - The AltaVault Expansion Shelf is not consistent with the stored 

configuration.

• Shelf Not Empty - You have added a new AltaVault Expansion Shelf that is not empty. A new 

AltaVault Expansion Shelf must be empty before you add it to AltaVault appliance.

• Shelf Not Valid - The AltaVault Expansion Shelf is not a valid shelf. For details, choose 

Reports > Storage RAID Groups and click the serial number of the shelf.

Storage Optimization 
Service

• Storage Optimization Service Down - Enables an alarm and sends an email notification if the 

Storage Optimization Service encounters a service condition. By default, this alarm is enabled. 

The message indicates the reason for the condition. The following conditions trigger this alarm:

• Configuration errors: examples include no encryption key set, incorrect appliance time, or 

incorrect cloud credentials.

• An AltaVault appliance reboot for example, during an appliance software update.

• A system crash due to a power failure

• A Storage Optimization Service restart due to a cloud storage provider change.

• A user enters the CLI command 

no service enable 

or shuts down the Storage Optimization 

Service from the Management Console

• A user restarts the optimization service from either the Management Console or CLI

• Storage Optimization Service Error - Enables an alarm and sends an email notification if the 

Storage Optimization Service encounters a condition that might degrade optimization 
performance. By default, this alarm is enabled. Go to the Maintenance > Service page and 
restart the optimization service.

Storage Optimization 

Service Replication

• Replication Error - Enables an alarm when the replication to the cloud encounters an error. 

Displays an error message that indicates the type of error such as, a file cannot be replicated to 
the cloud.

• Replication Paused - Enables an alarm when the replication to the cloud pauses, because there is 

a cloud connection error, or you entered the CLI command no replication enable, or because 

you are using replication scheduling (nonbandwidth limit type). This alarm warns you that the 
AltaVault is not replicating data in the cloud.

By default, this alarm is enabled.

System Reserved Space 
Full

Indicates that the space used for internal data structures is full. De-duplication performance is 
impacted while the appliance is in this state.

Alarm

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands