manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 46

46

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Configuring storage settings

Configuring OST

5.

Optionally, to remove an OST share, select the OST share from the table and click 

Remove Selected

6.

Optionally, to enable SSL communication between the AltaVault OST Plug-in and the AltaVault, select the 
checkbox, 

Enable SSL,

 in the Global OST Settings section, and click 

Apply

. AltaVault will communicate with 

the AltaVault OST Plug-in using secured port 8085.

To add an OST user to access the share

1.

To add a user to access the share that you created, select the share and specify:

Note: 

OST shares must have an associated user to be used by NetBackup storage server. Multiple users per OST share are allowed.

Pin Share

Optionally, enable data pinning on the share. Select Yes or No from the drop-down list 
to specify whether the OST share should be pinned. Share pinning enables the share to 

always contain data that is available to the AltaVault locally without fetching it from the 
cloud. You can pin OST shares only at the time of share creation. Existing unpinned 
shares cannot be pinned.

Once a share is pinned, unpinning of that share can be performed via CLI and requires 

optimization service to be offline. Unpinning a share can be a time-consuming 
operation. Unpinning a share does not result in erasing the previously pinned data. After 
unpinning, the previously pinned data becomes available for eviction.

You cannot remove a pinned share if it contains data. 

Early Eviction

Specify whether or not data from this share should be assigned a higher priority for 
eviction.

If you select yes, data written to this share is eligible for eviction earlier than other data. 

Disable Dedupe

Specify whether or not data written to this share should be checked for duplication. If 

you select yes, then the AltaVault will not perform duplication on data written to the 
share.

Disable Compression

Specify whether or not data written to this share should be compressed.

Select yes if your data set is already in a compressed format and will not benefit from 
further compression attempts. 

Add Share

Adds the OST share to the AltaVault.

Control

Description

Add OST User

Displays the controls to add a user to the OST share.

User Name

Type the user name that you would use for authenticating the share from NetBackup. 

Password

Specify the new password for the user.

Password confirm

Re-enter the password.

Add User

Adds the OST user.

Control

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands