manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 38

38

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Configuring storage settings

Configuring SMB

“To edit multichannel settings” on page 41

To configure an Active Directory domain

If your network has an Active Directory (AD) domain, you can add the AltaVault to the domain and enable domain 
users to access AltaVault SMB shares. You can add the AltaVault only to one domain. Ensure that you have 
permissions to join appliances to the domain.

1.

The SMB page does not appear until the Storage Optimization Service is started. If needed, choose Maintenance 
> Service and click Start to initialize the service.

2.

Optionally, you can specify up to three preferred domain controllers. Under Preferred Domain Controllers, enter 
a fully qualified domain name or IPv4 address for each controller. AltaVault accesses preferred controllers in order, 
starting with Domain Controller 1. 

If no controllers are specified, AltaVault uses DNS to discover domain controllers.

3.

Click 

Apply

.

4.

To join the AltaVault to an AD domain, go to the Domain section and specify:.

5.

Click Show Advanced Settings to display Advanced Settings to (optionally) configure the domain. Complete the 
configuration as described in this table.

6.

After you join a domain, the Domain section of the SMB page changes to reflect the domain that the AltaVault has 
joined.

When you leave a domain, specify:.

Reboot all client machines that were used to connect to the AltaVault to delete cached domain credentials.

Control

Description

Domain Name

Specify the fully qualified domain name of the AD that the AltaVault will join.

Username

Specify the username of a user which has appropriate permissions to add computers to 
the domain. 

Password

Specify the user’s domain password.

Control

Description

Hostname

Optionally, specify the hostname that the AltaVault will use as part of the domain. 

AltaVault then appears as the specified hostname in the AD.

Join Domain

Attempt to join the AltaVault to your AD domain.

Control

Description

Username

Optionally, specify the username of a user which has appropriate permissions to add 
computers to the domain. 

Password

Optionally, specify the user’s domain password.

Leave Domain

Attempt to remove AltaVault from the domain.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands