manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 33

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   33

        

Beta Draft

Using the Wizard Dashboard

Using the AltaVault configuration wizards

2.

After you configure a private cloud using the CLI, it appears in the Cloud Settings page and the dashboard in the 
Cloud Information section as the Provider. For more information on CLI, see the 

NetApp AltaVault Cloud 

Integrated Storage Command-Line Interface Reference Guide

.

3.

Choose Configure > Cloud Settings.

4.

Select the Cloud tab.

5.

Under Cloud Provider Settings, complete the configuration as necessary. Refer to your private cloud configuration 
for the required authentication credentials needed to communicate with this cloud.

Using the import configuration wizard 

Use the Import Configuration wizard to import a previously saved configuration into the AltaVault. The Import 
Configuration Wizard will fail if the AltaVault already has an encryption key set.

It is recommended to set the time zone to the AltaVault prior to uploading the configuration.

To use the import configuration wizard 

1.

From the management console, choose Configure > Setup Wizard.

2.

Select Import Configuration in the Wizard Dashboard.

3.

Select one of the following options:

Select Local File and click 

Browse

 to select a local configuration file from your computer.

-or-

Select URL and specify the URL of an appliance whose configuration you want to import.

4.

Leave the Import Shared Data Only check box selected to import only the following common settings:

Cloud settings

Email settings

Logging 

NTP settings

SNMP settings

Statistics or Alarms settings

Time zone settings

Web and CLI preferences

SMB, NFS, OST, SnapMirror configuration

When you select the Import Shared Data Only check box, the following settings are not imported:

General Security Settings

Static host configuration

Appliance licenses

Interface configuration, IP configuration, static routes, and virtual interfaces.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands