manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 30

30

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Using the AltaVault configuration wizards

Using the Wizard Dashboard

Hostname/IP address - Specify the hostname or the IP address.

Ports - Specify the port numbers for access.

Username - Specify the name of the user for access.

Password - Specify the user’s password.

Configuring S3-based storage

1.

Select yes or no to use keys from KMIP server from the drop-down list. When configuring the KMIP server, you 
must:

–

Use the same username and password as created in KMS. 

–

Upload the same certificate as downloaded from KMS after signing it.

–

Add a symmetric key (KMIP key) as the encryption key. 

–

Add a secret data key (KMIP key) for each of the authentication fields. 

2.

Specify the following settings:

Access Key - Specify the access key (same as the username).

Secret Key - Specify the secret key (password).

3.

Specify the hostname.

4.

Specify the bucket name associated with your cloud service provider account. You can use buckets to organize 
your data and control access to your data, but they cannot be nested. If the bucket name does not exist, the bucket 
is created during initial 

AltaVault

 replication.

5.

Specify the port number. 

6.

Enable Archiving - Enable this option if you are using the 

AltaVault

 for cold storage mode. For more information 

about cold storage mode, see 

“Deployment guidelines” on page 13

.

7.

Enable Cloud Deduplication - Enabling this option may improve deduplication rates for repetitive backup datasets, 
lowering cloud storage costs. Disabling this option is recommended for Amazon Glacier to improve recovery of 
recently written data from cache, but can decrease deduplication rates and increase cloud storage costs.

8.

Enable Cloud CA Certificate - Optionally, specify a cloud CA certificate that will be used to validate the server 
certificate of cloud provider. This must be .pem extension file. 

9.

Select the Enable Proxy check box to enable proxy server settings and specify:

Hostname/IP address - Specify the hostname or the IP address.

Ports - Specify the port numbers for access.

Username - Specify the name of the user for access.

Password - Specify the user’s password.

Configuring SWIFT-based storage

1.

Select yes or no to use keys from KMIP server from the drop-down list. When configuring the KMIP server, you 
must:

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands