manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 210

210

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

System maintenance AVA-400, AVA-800

Hot-swapping controller fan modules

Removing fan modules

You must replace the fan module within two minutes of removing it from the chassis to minimize disruption to the 
system's airflow. System airflow is disrupted and the controller module associated with the failed fan module shuts 
down after two minutes to avoid overheating. To understand AltaVault system behavior for single and multiple fan 
failure scenarios, see 

“Fan redundancy policy” on page 190

.

To remove a fan module

1.

If 

you

 are not already grounded, properly 

ground yourself

.

2.

With two hands, grasp the openings on each side of the bezel and pull it toward you until the bezel releases from 
the four ball studs on the chassis frame.

3.

Identify the fan module that you must replace by checking the error messages and looking at the attention LED on 
each fan module cam handle.

Note: 

If the fan attention LED is lit solid amber, the fan module has failed.

4.

Press down the release latch on the fan module cam handle and pull the cam handle downward to unseat the fan 
module from the chassis.

5.

Pull the fan module straight out from the chassis, as shown below. Make sure that you support the base of the fan 
module with your free hand, so that it does not fall out of the chassis.

Note: 

Controller fan modules are short. Always support the bottom of the module with your free hand, so that it does not suddenly 

drop free from the chassis.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands