manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 163

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   163

        

Seeding data using Snowball

Transferring data to the cloud using Amazon Snowball 

2.

To see detailed progress information, enter the following command:

hostname (config)# show seed detailed 

AltaVault displays more detail with regard to each status.

To pause and resume a Snowball operation

1.

Enter the following command to manually pause data transfer to Snowball:

hostname (config)#

 

seed snowball pause 

2.

Enter the following command to resume data transfer to Snowball:

hostname (config)# seed snowball resume 

Data transfer will pick up where it left off.

To cancel a Snowball operation

1.

To cancel a Snowball data transfer job, enter the following command:

hostname (config)# seed snowball cancel 

After canceling a job, AltaVault cleans up related files on the AltaVault appliance, including deletion of the 
manifest file. Any data transferred to Snowball remains and will be copied to the cloud bucket when the Snowball 
is returned to Amazon. If a Snowball job is canceled and the Snowball is re-used for a new seeding operation, the 
existing contents of the Snowball are overwritten with the latest copy. 

Verifying and completing data transfer

After the Snowball appliance is returned, Amazon copies the data to the S3 bucket created when you ordered Snowball. 
If you set up job notifications, Amazon emails you with status at each event. When you are notified that the transfer is 
finished, you must verify that the transfer completed correctly and complete the Snowball actions on AltaVault.

To verify the data transfer

1.

Check that Storage Optimization Service is running:

hostname (config)#

 

show service

If service is not running, start the service:

Paused

The Snowball copy process can enter Paused state for a number of 
reasons: 

• The seeding to Snowball is complete.

• The seeding to Snowball exited or paused due to an error.

• The seeding to Snowball is paused using the 

seed snowball 

pause 

command.

• Verification exited due to an error, including exiting Storage 

Optimization Service.

Verifying imported data

Data has been imported into the Amazon cloud, and AltaVault is in 
the process of verifying the data transferred to the cloud.

Completed

The data has been transferred successfully to cloud.

Status

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands