manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 156

156

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Viewing reports and logs

Viewing online file system check page

4.

Under Offline File System Check Actions, complete the configuration as described in this table.

5.

Open and check the Offline File System Check log file that you downloaded. If your configuration is accurate, the 
system displays the following results:

–

File verification summary displays: File check result: Volume consistent 

–

Label verification summary displays: Label check result: Volume consistent. 

Otherwise, the log file displays an error message.

Viewing online file system check page

The Online File System Check performs online verification of the data as it is written to the cloud. The Online File 
System Check report displays the log files that contain the integrity check data, the date and time of the check, and the 
file size.

You can perform the Online File System Check only if the Storage Optimization Service is running. You can stop the 
check at any time. 

To view the Online File System Check page

1.

Choose Maintenance > Online File System Check.

2.

Under Online File System Check Actions, click 

Start Data Integrity Check

 to start the check. 

-or-

Click 

Stop Data Integrity Check

 to stop the check.

Control

Description

Status

Displays the status of the Offline File System Check report such as, 

running or not running.

Check type

Select the type of diagnosis from the drop-down list:

• Internal Data Consistency - Checks only the internal consistency of the 

data. This is the fast mode.

• Complete - Checks the data completely from end to end. This is the 

slow mode.

Repair errors

Click this option to repair errors from which the system can recover.

Replay log after a crash

Click this option to replay log after a crash.

Start Mfsck 

Starts the Offline File System Check tool.

Stop Mfsck

Stops the Offline File System Check tool.

Field

Description

Download Link

Option to download a specific log file.

Integrity Check done up to

Displays the date and time up to which the AltaVault has performed the Online 
File System Check.

Size

Displays the size of the log file.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands