manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 136

136

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Viewing reports and logs

Viewing the CPU utilization report

The Alarm Status report answers the following question:

What is the current status of the AltaVault?

To view the Alarm Status report

Choose Reports > Alarm Status. Alternately, you can click the current alarm status that appears in the status box 
in the upper-right corner of each screen (Healthy, Degraded, or Critical).

Viewing the CPU utilization report

The CPU Utilization report summarizes the percentage of the CPU used within the time period specified.

Typically, the AltaVault operates on approximately 30 to 40 percent CPU capacity during nonpeak hours and 
approximately 60 to 70 percent capacity during peak hours. No single AltaVault CPU usage should exceed 95 percent.

The CPU Utilization report answers the following questions:

How much of the CPU is being used?

What is the average and peak percentage of the CPU being used?

Storage Optimization Service

• Storage Optimization Service Down - Enables an alarm and sends an email 

notification if the Storage Optimization Service encounters a service condition. 

By default, this alarm is enabled. The message indicates the reason for the 
condition. The following conditions trigger this alarm:

• Configuration errors: examples include no encryption key set, incorrect 

appliance time, or incorrect cloud credentials.

• An AltaVault appliance reboot for example, during an appliance software 

update.

• A system crash for example, due to a power failure

• A Storage Optimization Service restart for example, due to a cloud storage 

provider change.

• A user enters the CLI command no service enable or shuts down the Storage 

Optimization Service from the Management Console

• A user restarts the optimization service from either the Management Console 

or CLI

• Storage Optimization Service Error - Enables an alarm and sends an email 

notification if the Storage Optimization Service encounters a condition that might 
degrade optimization performance. By default, this alarm is enabled. 

Storage Optimization Service 
Replication

• Replication Error - Enables an alarm when the replication to the cloud encounters 

an error. Displays an error message that indicates the type of error such as, a file 

cannot be replicated to the cloud.

• Replication Paused - Enables an alarm when the replication to the cloud pauses, 

because there is a cloud connection error, or you entered the CLI command no 
replication enable, or because you are using replication scheduling 

(nonbandwidth limit type). This alarm warns you that the AltaVault is not 
replicating data in the cloud.

By default, this alarm is enabled.

System Reserved Space Full

Indicates that the space used for internal data structures is full. If you write more 
data to the appliance, it reduces deduplication performance.

Upgrade Status

Indicates the current AltaVault status.

Alarm

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands