background image

SANDSTORM

 SINGLE/DOUBLE CHAMBER

 INSTALLATION MANUAL | 21

WARRANTY

Netafim™ warrants all the components of the SandStorm™/SandStorm™ NC media filter system to be free of 
defects in material and workmanship for 5 (five) years from the date of installation.

Netafim™ warrants the SandStorm™/SandStorm™ NC controller and Aquative solenoids to be free of defects 
in material and workmanship for 1 (one) year from the date of installation.

If a defect is discovered during the applicable warranty period, Netafim™ will repair or replace, at its 
discretion, the product or the defective part.

This warranty does not extend to repairs, adjustments or replacements of a SandStorm™/SandStorm™ NC 
media filter system or part that results from reasonable wear and tear, misuse, negligence, alteration, force 
majeure, lightning, power surge, improper installation or improper maintenance.

If a defect arises in your Netafim™ product during the warranty period, contact your local Netafim™ 
representative.

Limited warranty

This warranty is subject to the conditions in Netafim’s official warranty statement.
(For the full text of Netafim’s official warranty statement, please contact your local Netafim™ representative).

Summary of Contents for SANDSTORM

























Reviews: