Nespresso CITIZ PLATIUM&MILK, Manual

Page: 33 / 72

FR
PANNES
DE
FEHLERBEHEBUNG
IT
RISOLUZIONE PROBLEMI
ES
RESOLUCIÓN DE PROBLEMAS
PT
RESOLUÇÃO DE PROBLEMAS
DA
FEJLFINDING
NO
FEILSØKING
SV
FELSÖKNING
FI
VIANMÄÄRITYS
CS
ŘEŠENÍ PROBLÉMŮ
SK
RIEŠENIE PROBLÉMOV
PL
ROZWIĄZYWANIE PROBLEMÓW
HU
HIBAELHÁRÍTÁS
RU
УСТРАНЕНИЕ НЕИСПРАВНОСТЕЙ
EL
ΑΝΤΙΜΕΤΩΠΙΣΗ
ΠΡΟΒΛΗΜΑΤΩΝ
NL
PROBLEMEN OPLOSSEN
RO
DEPANARE
33
7
EN
T R O U B L E S H O O T I N G
No light indicator • Check the power outlet, plug, voltage, and fuse. In
case of problems, call Nespresso .
No coffee, no water • First use: fill water tank with warm water
(max. 55 °C / 130 °F) and run through machine
according to instructions on page 11.
• Water tank is empty. Fill water tank.
• Descale if necessary; see Descaling section.
Coffee comes out very slowly • Flow speed depends on the coffee variety.
• Descale if necessary; see Descaling section.
Coffee is not hot enough • Preheat cup.
• Descale if necessary; see Descaling section.
Capsule area is leaking
(water in capsule container)
• Position capsule correctly. If leakages occur, call
Nespresso .
All beverage buttons blinking fast • Machine is in error, overheating or in an environment
below 0 °C / 32 °F. Please wait for all buttons to
stop blinking, this may take a few minutes. If buttons
still blink after a few minutes, unplug and replug the
machine.
• If problem persists, call Nespresso .
Descaling alert blinks during coffee
making (descaling alert level 1)
• Machine triggers descaling alert according
beverages consumption usage. Descale machine.
Descaling alert steady light
(descaling alert level 2)
• Machine triggers descaling alert according
beverages consumption usage. Descale machine
immediately to avoid machine performance and
coffee quality decrease.
Irregular blinking • Send appliance to repair or call Nespresso .
No coffee, just water runs out
(despite inserted capsule)
• In case of problems, call Nespresso .
Aeroccino does not start • Be sure to position the jug correctly on a clean base.
Be sure to attach the whisk to the jug correctly.
Quality of milk froth not up to standard • Be sure to use whole or semi-skimmed milk at
refrigerated temperature (about 4-6 °C / 39-42.8
°F). For a best result, the milk must be newly opened.
• Be sure to use the appropriate whisk and the jug is
clean.
• It is highly recommended to not use special enriched
milks, powdered reconstituted milks nor flavoured
milks.