Nesco KLEAN PLUS NC-5417, Instruction Manual

Page: 12 / 15

cup), add into tank, put back the
safety cover and secure it firmly.
5. Check the electricity and plug,
make sure they match the require-
ment of manual, and insert the plug.
6. The steam will be ready after 3-5
minutes heating. Press the steam
button slightly to see if the steam
starts to release.
7. Release the button; insert different
parts according to different usage.
8. Press the steam button again; start
cleaning.
Part installation
Brush sprayer installation
Insert the Brush sprayer to the body;
follow the arrow to secure the
Round or bend sprayer installa-
tion
Insert round or bend sprayer to the
short sprayer directly; follow the
instruction shows on Figure 3; adjust
the direction of the sprayer.
Flat sprayer installation
Insert brush sprayer to the short
sprayer; follow the figure 4 and 5 to
secure the brush sprayer.
Adding water
1. Remove the plug; cut off the elec-
tricity
2. Press the steam to release the
pressure until no steam is coming out.
3. Slightly open the safety cover; re
11
4. Use measuring cup to get 300 ml
water (about one and a half
sprayer in a clockwise way. The
sprayer can be removed in an
opposite way.
Operating Instruction
1. Open the package, check all parts
and manuals, and make sure no com-
ponent is missing in the package.
2. Please read the manual before
using the product. This product is only
for household using.
3. Put the steam cleaner on the table,
remove the safety cover, insert
funnel.
brush sprayer; aim at the floor; press
the steam button to remove dirty on
the ground.
Floor cleaning function
Insert long sprayer and bend or round