23
Installation Manual
Saturn Bm
INSTALLATION
ADE
Connecting the coaxial cable to the Antenna
1) Strip the cable leaving a free end of approxi-
mately 1 metre, ensuring adequate slack for
connection to the radome coaxial socket as
shown in Installation:
2) Mount the N-type connector to the coaxial
cable in accordance with the instructions (see
Appendices 1 – 5).
3) Connect the RF plug to the Antenna Unit
coaxial connector as shown in fig.
The minimum bending radius of the coaxial
cable is 10 cable diameters.
Pigtail
From Antenna
N-connector
Grounding Clamp
(part of Termination Box QUFC 911 948)
Pedestal
base
Antenna Cable
from MCU
N-connectors
bracket
Radome base
BDE
Connecting the coaxial cable to the MCU
1) Strip the coaxial Antenna Cable leaving sufficient slack for connec-
tion to the MCU or "pigtail".
See Installation:
"Connecting Up Below Decks Equipment"
2) Mount the N-plug on the cable in accordance with the instructions
(see Appendices 1 – 5).
3) Use the "pigtail" for connection of the Antenna Cable to the MCU.
Summary of Contents for Saturn BM Marine
Page 1: ...Saturn Bm Marine Class 2 Installation Manual...
Page 55: ......
