Nera Inmarsat-c, Service Manual

Page: 113 / 228

7.2 Messages for Operation
7-9
13. “Attach file is too large.”
14. “Attach file '%s' is not found.”
15. “Message is entered in sending Queue. Press any key.”
16. “Can't enter this message to sending Queue. Press any key.”
7.2.3 Messages for [F5]-1, Data Report menu
1. “Input Error: Country/Ocean Code.”
2. “Input Error: Station ID.”
3.
“Input Error : LES ID.”
4. “Input Error: Interval Time”
5. “Input Error: Start Time”
6. “Input Error: Modem Type”
7. “Input Error: Report Contents”
8. “Input Error: Report Times”
9. “Input Error: Destination”
10. “Input Error: E-Mail Address”
11. “Don't support E-Mail service in this NCS.”
12. “Input Error: Prefix Code”
7.2.4 Messages for [F7]-6-1, PV test
1. "Starting PV Test Process."
"Automatic test mode: Normal communication disabled."
"Do not press any distress button unless you are in distress."
7.2.5 Messages for Printer (Output from TERM CPU)
1. “Can't enter in Print Que.”
2. “Print Que is Full.”
3. “Can't print. PRINTER NOT READY.”
4. “Can't print. Paper Low.”
5. “Disk full. Can't enter in Print Que.”