Assembly Instructions
(3) Insert the shaft and propeller assembly into the coupling.
Tighten the setscrew.
3/8-16 HEX NUT
(1) Assemble Mixer as per the drawings. Make sure all hardware
is tight.
(2) Attach the coupling (Part # 3) to the air motor shaft (Part #1)
SHAFT ASS'Y. 5/16" DIA. X 30" LG. & 3" PROP.
PIVOT BOLT
MOUNTING BRACKET ASSEMBLY
CLAMP BODY ASSEMBLY
8
7
6
5
ITEM
NO.
#8-32 KEP NUT
MIXER MOTOR
4
2
1
DESCRIPTION
1
000528
1
1
1
000529
100642
002092
L-1-CL 24
100783
000967
1
1
1
1
1
1
1
4
QTY.
001073
-
-
-
-
-
003129
-
L-1-CL
100783
101221
000967
MIXER MODELS
(4) Always wear safety goggles when operating the mixer.
(3) Do not attempt to remove the mixing container or mixer when
mixer is operating, as this could result in personal injury or
damage to the mixer.
(2) Be certain propeller is not touching bottom or side of the
mixing container before starting mixer.
(1) Be certain that all mounting hardware and the setscrews
of coupling are properly tightened prior to operation.
Laboratory mixers are designed for mixing of fluid in a container.
The mixer is mounted using a supplied clamp or bracket, which is
attached to a tank. The shafts with propeller are removable
for cleaning.
General Safety Information
TO INSURE SAFE AND EASY USE OF YOUR MIXER,
READ THESE INSTRUCTIONS BEFORE USING.
Warning: These mixers are intended for specific functions.
Please follow all instructions to insure
safe and proper use.
ASSEMBLY INSTRUCTIONS AND PARTS LIST
MIXER MODELS: L-1-300, L-1-CL, L-1-BK
Description
"L" SERIES MIXER
ATTENTION:
295 DeKalb Pike, North Wales, PA 19454
TEL: 215-699-8700
FAX: 215-699-0370
Toll Free FAX: 1-800-255-4017
100783
-
-
-
003128
000967
L-1-CL 18
101221
101221
SHAFT COUPLING WITH SETSCREWS
3
SHAFT ASS'Y. 5/16" DIA. X 24" LG. & 3" PROP.
SHAFT ASS'Y. 5/16" DIA. X 18" LG. & 3" PROP.
SHAFT ASS'Y. 5/16" DIA. X 12" LG. & 3" PROP.
-
-
-
SHAFT ASS'Y. 5/16" DIA. X 30" LG. & 3" PROP.
000529
100783
-
-
-
-
000967
L-1-E
101221
000970
100783
-
-
000967
L-1-CL 12
101221
-
004113
-
000528
000528
000528
000528
002092
002092
002092
002092
100642
100642
100642
100642
MOUNTING BRACKET
9
-
2
-
-
-
-
000529
000529
000529
-
100783
-
-
-
000967
L-1-BK
101221
-
-
-
000968
-
001073
-
-
-
-
-
-
-
-
100783
001073
-
101221
000967
L-1-300
10
MOUNTING BRACKET
-
1
-
-
-
003287
-
-
PART NO.
PART NO.
PART NO.
PART NO.
PART NO.
PART NO.
PART NO.
A COMPANY
www.neptune1.com
DOVER
